FOXBORO FCM100E 光纖現場通信模塊
如果您需要咨詢或購買,請將產品型號發送到我的郵箱或直接打電話給我。
福克斯伯勒(施耐德電氣)
產品編號:P0972ZA
型號 : FCM100E 光纖現場通信模塊
模塊現場總線通信 傳輸速率:200 系列 DIN FBM 為 2 Mbps,100 系列 FBM 為 268 Kbps
以太網現場總線通信傳輸速率:100 Mbps
2 Mbps 現場總線電纜長度:最長 20 m
2 Mbps 現場總線 200 系列 FBM:每個 FCM100E 32 個(最多)現場總線模塊,具體取決于控制處理器規模限制
268 Kbps 現場總線電纜長度:最長 1830 m
268 Kbps 現場總線 100 系列 FBM:每個 FCM100E 最多 64 個現場總線模塊,具體取決于控制處理器大小限制。
輸入電壓范圍:21 至 42 V 直流
功耗:5 W(最大)
工作溫度:0 至 70°C(32 至 +158°F)
工作相對濕度:5 至 95%(非冷凝)
工作高度:–300 至 +3,000 m(–1,000 至 +10,000 英尺)
電纜材質:MMF 62.5/125 um
電纜長度:3m 至 2km,大于 50m - 用戶提供
尺寸(高x寬x深),約:11.4厘米x 5.15厘米x 14.7厘米
運輸重量:3 公斤
FOXBORO FCM100E 光纖現場通信模塊是福克斯波羅公司(Foxboro)推出的一款高性能、高可靠性的光纖通信模塊。它采用光纖作為傳輸介質,具有高速、長距離、抗干擾能力強等特點,能夠滿足工業自動化領域對于高性能和穩定性的需求。
FCM100E模塊支持多種通信協議和接口標準,如Modbus、Profibus等,可以與其他設備或系統進行通信和數據交換。它還具有多種接口類型,如光纖接口、以太網接口等,可以根據實際需求進行選擇和配置。
在工業自動化領域中,FCM100E模塊可以應用于各種過程控制系統中,如分布式控制系統、監控系統等。它可以與各種傳感器、執行器、控制器等設備進行連接,實現信號的采集、轉換和傳輸,從而實現對工業過程的監測和控制。
需要注意的是,FCM100E模塊的具體應用和配置可能因不同的應用場景和需求而有所不同。因此,在使用FCM100E模塊時,建議參考相關的技術文檔和資料,以確保其滿足特定的應用需求。

FBM01 P0400DA 0-20MA Input 8AI
FBM02 P0400YC thermocouple/millivolt input 8AI
FBM03 P0400YD thermal resistance input (three wire/four wire system) 8AI
FBM04 P0400YE 0-20MA I/O 4AI/4AO
FBM05 P0400YF redundancy 0-20MA input/output 4AI/4AO
FBM06 P0400YG frequency input/0-20MA output 4PI/4AO
FBM07 P0400YH contact/DC voltage input 16DI
FBM08 DM400YJ (P0400YJ) 120VAC AC status input 16DI
FBM09 CM400YK (P0400YK) contact/DC voltage input/contact output 8DI/8DO
FBM10 DM400YL (P0400YL) 120VAC AC status input/contact output (2A) 8DI/8DO
FBM11 CM400YM (P0400YM) 240VAC AC status input/contact output (1A) 8DI/8DO
FBM12 CM400YN (P0400YN) contact/DC voltage input extension 16DI
FBM13 DM400YP (P0400YP) 120VAC AC status input extension 16DI
FBM14 CM400YQ (P0400YQ) contact/DC voltage input/contact output extension 8DI/8DO
FBM15 DM400YR (P0400YR) 120VAC AC status input/contact output extension (2A) 8DI/8DO
FBM16 CM400YS (P0400YS) 240VAC AC status input/contact output extension (1A) 8DI/8DO
FBM17 DM400YT (P0400YT) 0-10V DC voltage/contact input/output 4AI/2AO/4DI/4DO
FBM18 P0400YV transmitter input 8AI

[Disclaimer]
Our company sells new products and discontinued products, and purchases such special products through independent channels. Guizhou Yuanmiao Automation Equipment Co., Ltd. is not an authorized distributor, distributor or representative of the featured products of this website. All product names/product images, trademarks, brands and microlabels used on this website are the property of their respective owners. Product descriptions, descriptions or sales with these name images, trademarks, brands and logos are for identification purposes only and do not represent any association or authorization with any right holders.







客服